Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-661002.png)
2. Install the cooling fan drive hub bearing.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
3. Install the cooling fan pulley.
^
Install the bolts, but do not tighten fully at this stage.
4. Install the accessory drive belt tensioner.
5. Install the cooling fan drive belt.
6. Tighten the cooling fan pulley bolts to 25 Nm (18 ft. lbs.).
7. Connect the battery ground cable.
