Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-666007.png)
13. Install the front wheels and tires.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).
CAUTION: Nuts and bolts must be tightened with the weight of the vehicle on the suspension.
14. Tighten the lower arm nuts and bolts to 165 Nm (122 ft. lbs.). plus a further 90 degrees.
CAUTION: Nuts and bolts must be tightened with the weight of the vehicle on the suspension.
15. Tighten the tie rod nuts and bolts to 165 Nm (122 ft. lbs.). plus a further 90 degrees.
All vehicles
16. Install the exhaust system.
17. Install the radiator splash shield.
18. Connect the battery ground cable.
19. Fill the front differential case with the correct amount of fluid.
20. Carry out a complete vehicle geometry check and adjustment.
