Range Rover (LM) V8-4.4L (2009)
9. Remove the engine mount.
^
Using a transmission jack, raise the engine clear of the engine mount.
^
Remove the 2 bolts.
Installation
1. Install the engine mount.
^
Clean the component mating faces.
^
Lower the engine onto the mount.
^
Tighten the nut to 100 Nm (74 ft. lbs.).
^
Tighten the bolts to 56 Nm (41 ft. lbs.).
2. Install the engine compartment RH heat shield.
^
Tighten the screws.
^
Tighten the nuts.
3. Install the engine undershield.
4. Install the cooling fan.
^
Tighten the cooling fan to 65 Nm (48 ft. lbs.).
5. Install the air intake resonator.
6. Install the coolant expansion tank.
7. Connect the battery ground cable.