Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-693001.png)
Intake Manifold: Service and Repair
Intake Manifold
Service Repair No - 30.15.02
Special Service Tools
Removal
CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean and dry.
Plug open connections to prevent contamination.
1. Disconnect the battery ground cable.
2. Remove the plenum chamber.
3. Remove the purge valve assembly.
4. Release the throttle body.
5. Disconnect the throttle body electrical connector.
^
Position the throttle body aside for access.
6. Disconnect the crankcase vent hose.
^
Position aside.
7. Disconnect the 2 heater coolant hoses.
^
Release the 2 clips.
^
Clamp the relevant hose, to minimize coolant loss.
^
Position an absorbent cloth to collect fluid spillage.
8. Release the heater hose support bracket.
^
Remove the 3 nuts.
^
Tie the bracket aside.