Range Rover (LM) V8-4.4L (2009)
25. Disconnect the refrigerant lines from the A/C compressor.
^
Remove the 2 bolts.
^
Remove and discard the O-ring seal.
26. Disconnect the A/C clutch electrical connector.
NOTE: 1 A/C compressor bolt will remain captive until the mounting bracket is removed.
27. Release the A/C compressor.
^
Fully loosen the upper front bolt.
^
Remove the remaining 2 bolts.
28. Remove the A/C compressor mounting bracket and the A/C compressor.
^
Remove the 2 bolts.
29. Remove the accessory drive belt idler pulley.
^
Remove the bolt.