Range Rover (LM) V8-4.4L (2009)
12. Release the transmission cooler pipe clips.
13. Remove the power steering pump mounting bracket.
^
Remove the 3 bolts.
CAUTION: Always plug any open connections to prevent contamination.
14. Disconnect the refrigerant lines from the A/C compressor.
^
Remove the 2 bolts.
^
Remove and discard the O-ring seal.
15. Disconnect the A/C clutch electrical connector.
16. NOTE: 1 A/C compressor bolt will remain captive until the mounting bracket is removed.
Release the A/C compressor.
^
Fully loosen the upper front bolt.
^
Remove the remaining 2 bolts.