Range Rover (LM) V8-4.4L (2009)
Control Assembly: Service and Repair
Climate Control Assembly
Climate Control Assembly
Removal
NOTE: On high line models the climate control ECU is an integral part of the climate control assembly. Using the Land Rover approved diagnostic
system, calibrate a new climate control assembly.
1. Remove the RH floor console extension.
2. Remove the LH floor console extension.
-
Remove the screw.
-
Release the 2 clips.
3. Release the climate control assembly.
-
Release the 4 clips.
4. Remove the climate control assembly.
-
Disconnect the 5 electrical connectors.
Installation
1. Install the climate control assembly.
-
Connect the electrical connectors.
2. Attach the climate control assembly.
-
Secure the clips.
3. Install the LH floor console extension.
-
Secure the clips.
-
Tighten the screw.
4. Install the RH floor console extension.
5. Using the Land Rover approved diagnostic system, calibrate a new climate control assembly.