Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1880001.png)
Housing Assembly HVAC: Service and Repair
Heater Core and Evaporator Core Housing
Removal
WARNING:
-
Persons working on the supplemental restraint system (SRS) must be fully trained and have been issued with the safety guidelines.
-
Allow a period of 10 minutes to elapse after disconnecting the battery before undertaking any work on the SRS.
-
The SRS electrical connectors are unique. DO NOT force, or attempt to connect electrical connectors to the wrong sockets.
-
The correct procedures must always be used when working on SRS components.
-
The correct procedures must always be used when working on SRS components.
-
Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse
connect the battery.
-
Take extra care when handling SRS components.
1. Remove the in-vehicle crossbeam.
2. With assistance, remove the heater and evaporator core housing.
Installation
1. With assistance, install the heater and evaporator core housing.
2. Install the in-vehicle crossbeam.
