Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2464004.png)
20. Disconnect the passive anti-theft system (PATS) electrical connector.
21. NOTE: LHD illustration shown, RHD is similar.
Release the gearshift interlock cable from the in-vehicle crossbeam.
^
Remove and discard the tie-strap.
22. Release the wiring harness clip from the passenger side of the in-vehicle crossbeam.
23. Disconnect the rear blower motor electrical connector.
^
Release the electrical connector from the clip.
24. Release the wiring harness from the passenger side of the in-vehicle crossbeam.
^
Release the 8 clips.
25. Release the wiring harness from the passenger side of the in-vehicle crossbeam.
