Range Rover (LM) V8-4.4L (2009)
Parking Assist Warning Indicator: Service and Repair
Rear Parking Aid Speaker
Rear Parking Aid Speaker
Removal
1. Remove the access panel from the loadspace trim panel RH.
2. Disconnect the rear parking aid speaker electrical connector.
3. Remove the rear parking aid speaker.
-
Remove the nut.
Installation
1. Install the rear parking aid speaker.
-
Tighten the nut to 10 Nm (7 lb.ft).
2. Connect the rear parking aid speaker electrical connector.
3. Install the access panel to the loadspace trim panel RH.