Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2625001.png)
Turn Signal Lamp: Service and Repair
Side Turn Signal Lamp
Removal
1. Remove the side turn signal lamp.
-
Push the lamp forwards to release it from the fender.
-
Disconnect the side turn signal lamp electrical connector.
NOTE: Do not disassemble further if the component is removed for access only.
2. Remove the bulb holder.
-
Remove the bulb from the holder.
Installation
1. Install the bulb holder.
-
Install the bulb.
2. Install the side turn signal lamp.
-
Connect the side turn signal lamp electrical connector.
