Range Rover (LM) V8-4.4L (2009)
Drive Belt: Service and Repair
Accessory Drive Belt
Accessory Drive Belt
Service Repair No - 86.10.03
Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
3. Loosen the 3 cooling fan pulley bolts.
4. Remove the cooling fan drive belt.
5. Remove the accessory drive belt tensioner.
6. Remove the cooling fan pulley.
^
Remove the 3 bolts.
7. Remove the cooling fan drive hub bearing.
^
Remove the 5 bolts.
8. NOTE: Note the fitted position.
Remove the accessory drive belt.
Installation
1. Install the accessory drive belt.