Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-520001.png)
Coolant: Service and Repair
Coolant - Drain, Flush & Refill
Service Repair No - 26.10.01
Before disconnecting the battery, ensure all text and cautions in the battery disconnection information are observed.
Drain
1. Position vehicle on lift.
2. Set heater controls to maximum.
3. Disconnect battery earth lead.
4. Remove coolant expansion tank cap.
WARNING: Since injury such as scalding could be caused by escaping steam or coolant, do not remove the filler cap from the coolant
expansion tank while the system is hot.
5. Remove undertray.
6. Position container beneath radiator to collect coolant.
7. Fit tube to drain tap, open tap and allow coolant to drain.
CAUTION: Engine coolant will damage paint finished surfaces. If spilled, immediately remove coolant and clean area with water.
8. Position container beneath engine to collect coolant.