landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Procedures|Page 4748 > < Procedures|Page 4746
Page 5
background image

30. Disconnect the 4 electrical connectors on the LH injectors.

-

Release the 2 clips.

-

Repeat the above procedure for the RH side.

31. Disconnect the 4 LH ignition coil-on-plug connectors.

-

Release the 2 clips.

-

Repeat the above procedure for the RH side.

32. Disconnect the engine coolant temperature (ECT) sensor electrical connector.
33. Disconnect the EGR valve electrical connector.

34. Disconnect the fuel temperature sensor electrical connector.

35. Disconnect the camshaft position (CMP) sensor electrical connector.

-

Repeat the above procedure for the RH side.

Procedures|Page 4748 > < Procedures|Page 4746