Range Rover (LM) V8-4.4L (2009)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature (ECT) Sensor
Removal
1. Disconnect the battery ground cable.
2. Remove the intake manifold assembly.
3. Remove the ECT sensor.
^
Position an absorbent cloth to collect fluid spillage.
^
Disconnect the electrical connector.
^
Remove the sensor and discard the seal.
Installation
1. Install the ECT sensor.
^
Clean the components.
^
Install a new O-ring seal.
^
Secure with the clip.
^
Connect the ECT sensor electrical connector.
2. Install the intake manifold assembly.
3. Connect the battery ground cable.
4. Top-up the coolant.