Range Rover (LM) V8-4.4L (2009)
Air Flow Meter/Sensor: Service and Repair
Mass Air Flow (MAF) Sensor
Removal
1. Disconnect the battery ground cable.
2. Disconnect the mass air flow (MAF) sensor electrical connector.
3. Remove the MAF sensor.
^
Remove the 2 screws.
Installation
1. To install, reverse the removal procedure.
^
Tighten Torx screws to 2 Nm (1.5 ft. lbs.).
NOTE: For NAS vehicles only.
2. If required, carry out a short drive cycle.