Range Rover (LM) V8-4.4L (2009)
Ignition Coil: Service and Repair
Ignition Coil
Ignition Coil
Removal
1. Disconnect the battery ground cable.
2. Remove the engine cover.
3. Remove the ignition coil cover.
^
Release from the 2 clips.
4. Disconnect the ignition coil-on-plug electrical connector.
5. Remove the ignition coil-on-plug.
^
Remove the bolt.
^
Remove and discard the seal.
Installation
1. To install, reverse the removal procedure.
^
Tighten the bolt to 6 Nm (4 ft. lbs.).