Range Rover (LM) V8-4.4L (2009)
Parking Assist Control Module: Service and Repair
Parking Aid Camera
Parking Aid Camera
Removal
1. Remove the rear spoiler.
2. Remove the parking aid camera.
-
Remove the screw.
-
Release the 2 clips.
3. Remove the parking aid camera bracket.
-
Drill out the rivet.
-
Release the parking aid camera bracket, adhesive pads.
Installation
NOTE: Make sure that all the component mating faces are clean.
1. Install the parking aid camera bracket.
-
Secure the bracket with new adhesive pads and rivet.
2. Install the parking aid camera.
-
Secure the clips.
-
Install the screw.
3. Install the rear spoiler.