landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Variable Induction Control Module > < Diagram Information and Instructions|Page 380
Page 1
background image

Fuel Pump Relay: Description and Operation

FUEL PUMP RELAY

The V8 engine has a returnless fuel system. The system pressure is maintained at a constant 4 bar (59 Psi), with no reference to intake manifold pressure.
The fuel is supplied to the injectors from a fuel pump fitted within the fuel tank. The electrical supply to this fuel pump is controlled by the ECM (engine
control module) via a relay and the RCM (restraints control module) which will turn the fuel off upon a vehicle impact. The fuel system is pressurized as
soon as the ECM (engine control module) is powered up, the pump is then switched off until engine start has been achieved.

Variable Induction Control Module > < Diagram Information and Instructions|Page 380