Range Rover (LM) V8-4.4L (2009)
7. WARNING: Do not handle the deployed device immediately after activation - it may be hot. Allow the unit to cool for at least 20
minutes. Cooling modules should be continuously monitored to make sure heat does not create a fire with spilled liquids or other debris.
Failure to follow this instruction may result in personal injury.
Deploy the safety belt pretensioner by operating both of the switches on the special tool. If deployment does not occur, disconnect the battery from
the special tool and seek advice from Land Rover.
8. Allow the safety belt pretensioner to cool for at least 20 minutes. Cooling SRS modules should be continuously monitored to make sure the heat
does not generate a fire with spilt liquids or other debris.
9. Remove the safety belt pretensioner from the air bag deployment tool bracket and seal in a plastic bag, ready for disposal.
10. In the event of any problems or queries arising from this procedure, contact Land Rover.