Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1930001.png)
Air Bag Deactivation Switch: Service and Repair
Passenger Air Bag Deactivation (PAD) Switch
Service Repair No - 76.74.19
Removal
WARNING:
^
Persons working on the supplemental restraint system (SRS) must be fully trained and have been issued with the safety guidelines.
^
Allow a period of 10 minutes to elapse after disconnecting the battery before undertaking any work on the SRS.
^
The SRS electrical connectors are unique. DO NOT force, or attempt to connect electrical connectors to the wrong sockets.
^
The correct procedures must always be used when working on SRS components.
^
It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.
^
Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse
connect the battery.
^
Take extra care when handling SRS components.
1. Make the air bag supplemental restraint system (SRS) safe.
2. Disconnect the battery ground cable.
3. Remove the instrument panel end trim panel.
^
Release sufficient door aperture seal for access.
^
Carefully release the 4 clips.
^
Disconnect the electrical connector from the passenger air bag deactivation switch.
4. Remove the passenger air bag deactivation switch.
^
Release the 2 clips.
Installation
1. Install the passenger air bag deactivation switch.
2. Install the instrument panel end trim panel.
^
Connect the passenger air bag deactivation switch electrical connector.
^
Carefully align and secure the clips.
^
Install the aperture seal.
3. Connect the battery ground cable.