Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1967001.png)
Seat Belt Retractor: Service and Repair
Rear Safety Belt Retractor
Rear Safety Belt Retractor
Removal
1. Remove the C-pillar trim panel.
2. Release the safety belt upper anchor.
^
Remove and discard the bolt.
3. Remove the rear safety belt.
^
Remove and discard the bolt.
^
Release the rear safety belt retractor.
Installation
1. Install the rear safety belt.
^
Secure the safety belt retractor.
^
Install the new bolt and tighten to 31 Nm (23 ft. lbs.).
2. Secure the safety belt upper anchor.
^
Install the new bolt and tighten to 31 Nm (23 ft. lbs.).
3. Install the C-Pillar trim panel.
