Range Rover (LM) V8-4.4L (2009)
Seat Belt Tensioner: Service and Repair
Front Safety Belt Retractor
Front Safety Belt Retractor
Service Repair No - 76.73.13
Removal
1. Disconnect the battery ground cable.
2. Make the air bag supplemental restraint system (SRS) safe.
3. Remove the B-pillar trim panel.
4. Remove the safety belt guide.
^
Remove the 2 bolts.
5. Release the safety belt from the safety belt shoulder height adjuster.
^
Remove and discard the nut.
6. Remove the front safety belt.
^
Release the front safety belt retractor.
^
Remove and discard the bolt.
Installation
1. Install the front safety belt.
^
Secure the front safety belt retractor.
^
Install the new bolt and tighten to 31 Nm (23 ft. lbs.).
2. Secure the safety belt to the safety belt shoulder height adjuster.
^
Install the new nut and tighten to 31 Nm (23 ft. lbs..).
3. Install the safety belt guide.
^
Tighten the bolts to 6 Nm (4.4 ft. lbs.).
4. Install the B-pillar trim panel.
5. Connect the battery ground cable.