Range Rover (LM) V8-4.4L (2009)
Parking Brake Release Switch: Service and Repair
Parking Brake Switch
Service Repair No - 70.35.46
Removal
1. Disconnect the battery ground cable.
2. Remove the floor console upper panel.
3. Remove the parking brake switch.
^
Remove the parking brake switch trim panel.
^
Remove the 2 screws.
Installation
1. Install the parking brake switch.
^
Install the 2 screws.
^
Install the parking brake switch trim panel.
2. Install the floor console upper panel.
3. Connect the battery ground cable.