Range Rover (LM) V8-4.4L (2009)
fitted to the spare wheel the identification for that sensor must be programmed into the Tire Pressure Monitoring System (TPMS) module using
T4. The identification code is provided on a label with the complete assembly and is also printed on the casing of each sensor.
2. Install the tire low pressure sensor.
^
Install and hand tighten the nut whilst keeping the sensor in place.
^
Tighten the nut to 8 Nm (6 ft. lbs.).
3. Install the tire and balance the wheel.
4. Install the wheel and tire.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).