Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1678004.png)
CAUTION: Ensure the ball joint seal is not damaged. A damaged seal will lead to the premature failure of the joint.
15. LH front: Disconnect the steering gear tie rod end ball joint.
^
Use the special tool.
^
Loosen the tie-rod end ball joint retaining nut.
^
Discard the nut.
CAUTION: Note the fitted position of the special washer.
NOTE:
Use an additional wrench to prevent the ball joint rotating.
16. LH front: Disconnect the stabilizer bar link.
^
Remove the nut.
^
Remove the flat washer.
CAUTION: Support the lower arm.
17. LH front: Disconnect the lower arm.
^
Remove the bolt and discard the nut.
