Range Rover (LM) V8-4.4L (2009)
27. Release the LH engine mount.
^
Remove the bolt.
28. Release the steering gear.
^
Remove and discard the 2 nuts and Torx bolts.
29. Remove the steering gear.
^
Raise the engine.
^
With assistance, carefully rotate and release the steering gear.
NOTE:
Do not disassemble further if the component is removed for access only.
30. Remove the tie-rod end.
^
Note the fitted position.
^
Loosen the locknut.
^
Remove and discard the locking ring.
^
Remove and discard the locknut.
^
Repeat the above procedure for the other side.