landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Transmission Support Crossmember - 4.2L/4.4L|Page 5119 > < Front Cross-Member|Service and Repair
Page 1
background image

Rear Cross-Member: Service and Repair
Transmission Support Crossmember - 4.2L/4.4L

Transmission Support Crossmember - 4.2L/4.4L

Service Repair No - 76.10.09/76.10.92

Removal

1. Disconnect the battery ground cable.

2. WARNING:  Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.

3. Remove the exhaust system.
4. Remove the RH heat shield.

^

Remove the 7 nuts.

5. Remove the LH heat shield.

^

Remove the 5 nuts.

6. Remove the LH exhaust hanger.

^

Remove the nut.

7. Remove the transmission support insulator nut, bolt and damper.

^

Support the transmission.

Transmission Support Crossmember - 4.2L/4.4L|Page 5119 > < Front Cross-Member|Service and Repair