Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1725001.png)
Stabilizer Link: Service and Repair
Front Suspension
Front Stabilizer Bar Link
Service Repair No - 60.10.02/60.10.04
Removal
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
1. Raise the front of the vehicle.
2. Remove the wheel and tire.
3. Release the stabilizer bar link.
^
Remove the nut.
CAUTION: Note the fitted position of the special washer.
4. Remove the stabilizer bar link.
^
Remove the nut.
^
Collect the washer.
Installation
1. Install the stabilizer bar link.
^
Install the special washer.
^
Tighten the nuts to 100 Nm (74 ft. lbs.).
2. Install the wheel and tire.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).
