Range Rover (LM) V8-4.4L (2009)
Rear Subframe Mount: Service and Repair
Rear Subframe Bushing - 4.2L/4.4L
Special Service Tools
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the rear wheels and tires
3. Using the Land Rover approved diagnostic system, depressurize the air suspension.
4. Remove the rear driveshaft.
5. Disconnect the electrical connectors from the LH and RH rear height sensors.
6. NOTE: RH illustration shown, LH is similar
Release the LH and RH brake pipes.
^
Remove the 4 bolts.
7. NOTE: RH illustration shown, LH is similar
Release the LH and RH anti-lock brake system (ABS) wiring harnesses.
^
Release the brake pad wear sensor wiring harness.
^
Release from the 12 clips.