Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1772004.png)
4. Release the ABS sensor lead and brake line.
^
Release from the 3 clips.
5. LH side: Release the brake pad wear sensor lead.
^
Release from the clip.
CAUTION: Note the fitted position of the special washer.
NOTE:
Use an additional wrench to prevent the ball joint rotating.
6. Release the stabilizer bar link.
^
Remove the nut.
WARNING: Use a jack to support the hub and lower arm.
7. Release the hub from the air suspension spring.
^
Remove the 2 nuts and 2 bolts.
^
Lower the jack.
8. Mark the fitted position of the stud to aid assembly.
^
Remove the nut.
CAUTION: Lower the air suspension spring sufficiently to release the air line connection.
CAUTION: Do not allow the brake caliper to hang on the brake hose.
NOTE:
Models with standard brakes shown, models with high performance brakes similar.
9. Release the air suspension spring.
^
Remove the cap.
^
Remove the 2 remaining nuts.
