Range Rover (LM) V8-4.4L (2009)
Fluid Pan: Service and Repair
Fluid Pan, Gasket and Filter
Service Repair No - 44.24.04
Removal
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
1. Raise and support the vehicle.
2. Drain the transmission.
3. Remove the fluid pan.
^
Position a container to collect the fluid spillage.
^
Remove the 21 Torx screws.
^
Remove and if necessary, discard the seal.
^
Discard the O-ring seal.
Installation
1. Install the fluid pan.
^
Clean the components.
^
Install the seal.
^
Install a new O-ring seal.
^
Tighten the Torx screws to 8 Nm (6 ft. lbs.).
2. Refill the transmission with fluid.