Range Rover (LM) V8-4.4L (2009)
Shifter A/T: Service and Repair
Selector Lever Assembly
Selector Lever Assembly
Service Repair No - 44.15.04
Removal
1. Disconnect the battery ground cable.
2. Remove the floor console upper panel.
NOTE:
Collect the plastic spacer from the selector lever cable.
3. Release the selector lever cable.
1) Remove the selector lever clip from the selector lever inner cable.
2) Remove the selector lever housing clip from the selector cable.
4. Disconnect the 3 electrical connectors.
5. Release the gearshift interlock cable.
^
Remove the bolt.
^
Remove the clamp.
6. Remove the selector lever assembly.
^
Remove the 3 nuts.