landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Valve Body, A/T|Service and Repair|Page 3586 > < Transmission Position Switch/Sensor, A/T|Locations|Page 3582
Page 1
background image

Valve Body: Service and Repair

Main Control Valve Body

Service Repair No - 44.40.01

Special Service Tools

Removal

NOTE:

The transmission control module (TCM) is part of the main control valve body and cannot be serviced separately.

1. Disconnect the battery ground cable.

WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

2. Raise and support the vehicle.
3. Remove the fluid pan.
4. Disconnect the electrical connector.

5. Remove and discard the electrical connector sleeve.

^

Release the retainer.

6. Remove the main control valve body.

^

Position a container to collect spillage.

^

Remove the 10 Torx screws.

Valve Body, A/T|Service and Repair|Page 3586 > < Transmission Position Switch/Sensor, A/T|Locations|Page 3582