Range Rover (LM) V8-4.4L (2009)
Differential Output Shaft Bearing: Service and Repair
Front Drive Halfshafts
Halfshaft Bearing
Service Repair No - 47.10.41
Special Service Tools
Removal
1. Remove and discard the RH halfshaft seal.
2. Remove the halfshaft support bearing housing.
^
Remove the 4 bolts.
^
Remove and discard the O-ring seal.
NOTE:
Do not disassemble further if the component is removed for access only.
3. Remove the halfshaft bearing.
Installation
1. Using the special tool install the halfshaft bearing.
^
Lubricate the halfshaft bearing with clean differential oil.
2. Install the halfshaft support bearing housing.
^
Install a new O-ring seal.
^
Tighten the 4 bolts to 22 Nm (16 ft. lbs.).
3. Install the RH halfshaft seal.