Range Rover (LM) V8-4.4L (2009)
CAUTION: Care must be taken to avoid damage to the seal register and running surface.
12. Remove the output flange seal.
13. Remove the output flange bearing.
^
Remove the circlip.
14. Release the front half of the transfer case from the flat surface.
^
Remove the 2 bolts.
Installation
1. Remove the sealant from the transfer case mating faces.
2. Clean the magnetic filter.
CAUTION: The chamfer on the bearing inner track must face the seal.
3. Using the special tool, install the output flange bearing.
^
Clean the components mating faces.
^
Install the circlip.
4. Using the special tool, install a new oil seal.
^
Clean the component mating faces.
^
Grease the new seal.