Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1351007.png)
8. Apply a 2 mm bead of sealant to one surface of the transfer case mating face, as shown.
^
Clean the component mating faces.
^
Clean the dowels and dowel holes.
9. Install the front half of the transfer case.
^
Evenly tighten the 2 Torx bolts shown to 35 Nm (26 ft. lbs.).
10. With assistance, release the transfer case and secure with its transmission mating face down on a flat surface.
11. Tighten the remaining Torx bolts to 35 Nm (26 ft. lbs.).
12. Install the shift motor.
^
Clean the components.
^
Tighten the Torx bolts to 25 Nm (18 ft. lbs.).
