landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Transfer Case Input Shaft Seal|Page 3960 > < Transfer Case Input Shaft Seal|Page 3958
Page 9
background image

WARNING: Eye protection must be worn.

7. Remove 17 Torx bolts securing the transfer casings.

^

The two bolts indicated remain fully tightened.

^

Remove any debris from the bolt holes.

WARNING: Eye protection must be worn.

CAUTION: Care must be taken to avoid damage to the mating surfaces.

8. Remove the rear half of the transfer case.

^

Remove the remaining 2 Torx bolts.

^

Remove any debris from the bolt holes.

^

Use a soft faced mallet.

Transfer Case Input Shaft Seal|Page 3960 > < Transfer Case Input Shaft Seal|Page 3958