Range Rover V8-44L (2009) Rear Door Window Regulator System Information - Page 8408
Rear Door Window Regulator: Service and Repair
Rear Door Window Regulator Motor
Removal
1. Remove the rear door window glass.
2. Remove the rear door window regulator and motor.
^
Disconnect the electrical connector.
^
Remove and discard the lower bolt.
^
Remove the 2 upper bolts.
Installation
1.
Install the rear door window regulator and motor.
^
Remove the two clips from the rear door window regulator and motor.
^
Tighten the 2 upper bolts to 10 Nm (7 ft. lbs.).
^
Tighten the new bolt to 10 Nm (7 ft. lbs.).
2.
Connect the rear door window glass regulator and motor electrical connector.
3.
Install the rear door window glass.