Range Rover (LM) V8-4.4L (2009)
Windshield Washer Pump: Service and Repair
Windshield Washer Pump
Service Repair No - 84.10.21
Removal
1. Remove the front LH fender splash shield.
2. Position a container to collect any windshield washer reservoir spillage.
3. Disconnect the windshield washer pump electrical connector.
^
Remove the windshield washer pump hose.
4. Remove the windshield washer pump.
^
Remove and discard the seal.
Installation
1. Install the windshield washer pump.
^
Clean the component mating faces.
^
Install a new seal.
2. Connect the electrical connector.
^
Connect the hose to the pump.
3. Fill the windshield washer reservoir with the correct fluid and concentration.
4. Install the front LH fender splash shield.