Range Rover (LM) V8-4.4L (2009)
Wiper Motor: Service and Repair
Windshield Wiper Motor
Windshield Wiper Motor
Service Repair No - 84.15.12
Removal
1. Disconnect the battery ground cable.
2. Remove the windshield wiper motor.
^
Mark the position of the windshield wiper motor linkage to aid assembly.
^
Remove the windshield wiper motor to windshield wiper motor linkage assembly nut.
^
Release the wiper linkage assembly from the windshield wiper motor.
^
Remove the 3 windshield wiper motor to support bracket bolts.
^
Disconnect the electrical connector.
Installation
1. Install the windshield wiper motor.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
^
Connect the electrical connector.
2. Carry out the windshield wiper motor park operation.
^
Connect the battery ground cable.
^
Turn the ignition key to the ON position and make sure the windshield wiper motor is in the park position, turn the ignition key to the OFF
position.
^
Disconnect the battery ground cable.
3. Install the windshield wiper motor and linkage.
^
Reposition the windshield wiper motor linkage to its original position.
^
Install the windshield wiper motor to windshield wiper motor linkage assembly nut.
^
Tighten the nut to 25 Nm (18 ft. lbs.).
4. Connect the battery ground cable.