Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2731001.png)
Wiper Motor Linkage: Service and Repair
Wiper Linkage Assembly
Removal
1. Remove the cowl panel grille.
2. Remove the plenum chamber.
3. Disconnect the windshield wiper motor electrical connector.
4. Remove the windshield wiper assembly.
^
Remove the 5 bolts.
Installation
1. Install the windshield wiper motor assembly.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
2. Connect the windshield wiper motor electrical connector.
3. Install the plenum chamber.
4. Install the cowl panel grille.
