Range Rover (LM) V8-4.4L (2009)
Wiper Pivot: Service and Repair
Windshield Wiper Pivot Arm
Windshield Wiper Pivot Arm
Special Service Tools
Removal
1. Remove the nut cover from the windshield wiper pivot arm and remove the nut.
2. Remove the windshield wiper pivot arm from the pivot shaft.
3. NOTE: Do not disassemble further if the component is removed for access only.
Release the windshield wiper pivot arm to windshield wiper blade locking clip.
4. Release the windshield wiper blade from the windshield wiper pivot arm.
Installation
1. Install the new windshield wiper blade to the windshield wiper pivot arm.
2. Push the windshield wiper blade fully home, to engage the windshield wiper pivot arm locking clip, check the windshield wiper blade for
retention.
3. Install the windshield wiper pivot arm to the windshield wiper pivot shaft.
^
Install the nut but do not fully tighten at this stage.
4. Align the special tool between points A and B on the windshield wiper pivot arm.
^
Align the face of the windshield wiper pivot arm to the special tool angle of 86 degrees.