landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

A/C - Insufficient Cooling|Page 7618 > < A/C - Insufficient Cooling|Page 7616
Page 2
background image

RELEASE AND REPLACE FRONT DOOR LATCH

1.

Unlock all doors.

2.

Verify that all door lock-buttons are in the UP position indicating an unlocked condition.

3.

Partially open the rear door behind the affected front door. (Figure 1)

CAUTION:

Protection in the area of the front-edge of the rear door and the rear-edge of the front door is required to prevent paint damage.

4.

Place tape or other suitable protection on the front-edge of the rear door and the rear-edge of the front door. (Figure 1 and Figure 2)

5.

Identify the grommet covering the latch adjustment screw of the front door latch. (Figure 1)

6.

Remove the grommet covering the latch adjustment screw. (Figure 2)

7.

Using a suitable implement (bent wire or similar), locate and hook the adjustment screw. (Figure 3)

A/C - Insufficient Cooling|Page 7618 > < A/C - Insufficient Cooling|Page 7616