Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
2.
Remove the grommet from the front doors (Figure 1) and the rear doors (Figure 2) for access to the door lock *adjuster* screw.
CAUTION:
The screw threads are counter-clockwise on LH doors and clockwise on RH doors.
3.
Release the door lock *adjuster* screw on the affected door(s) two turns.
4.
Tighten the door lock *adjuster* screws to 4 Nm (36 lbf.in.).
5.
Install the door lock *adjuster* screw grommets.
6.
Close front and rear doors.
Disclaimer