Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
^
If installed, remove grommet from the affected door (Figure 6 and Figure 7) for access to the door lock tensioning screw.
NOTE:
The door lock tensioner screws rotate counterclockwise on LH doors, clockwise on RH doors to release tension.
^
Release the door lock tensioning screw two turns.
^
Tighten the door lock tensioning screws to 4 Nm (3 lbf ft).
4.
Install the door lock tensioning screw grommet.
5.
Close front and rear doors.
Disclaimer