Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
Refit
1. Fit footwell lamp assembly to finisher.
2. Fit cup holder to finisher and secure clips.
3. Position finisher and connect lamp multiplug.
4. Fit finisher to fascia and secure with screws.
5. Fit and tighten screw securing cup holder to mounting bracket.
6. Fit face level air vent.
7. Fit fascia end closing panel.
8. Fit 'A' post finisher.
Finisher - Lower - Passengers Side
Service repair No - 76.46.14
Remove
1. Remove fascia end closing panel.
2. Remove RH lower 'A' post finisher.
3. Remove passenger side footwell closing panel.
4. Remove cover from lower finisher for access to Torx screw.
5. Remove 3 Torx screws securing upper finisher to fascia.
6. Remove finisher.
7. Remove clips from finisher.
Refit
1. Fit clips to finisher.
2. Fit finisher to fascia and secure with screws.
3. Fit blanking plug to finisher.
4. Fit passenger side footwell closing panel.
5. Fit lower 'A' post finisher.
6. Fit fascia end closing panel.
Foot Rest Finisher - LHD
76.13.24 Foot Rest Finisher - LHD
Remove
1. Remove carpet retainer.