Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
Seat Cushion: Service and Repair
Cover - Rear Seat Cushion - RH
Cover - Rear Seat Cushion - RH
Service repair No - 78.40.04
Remove
1. Remove seat base finisher.
2. Remove seat fold mechanism.
3. Disconnect multiplug from squab harness.
4. Remove Torx bolt securing squab frame to seat frame, separate frames.
5. Release seat cover both sides and front beading, raise cover and cushion.
6. Release heated seat harness multiplug from retaining clip and feed harness through frame.
7. Release 1 stud and rear beading securing seat cover to frame, remove cover and cushion.
8. Release 11 staples securing seat cover to cushion.