Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-1118001.png)
Yaw Rate Sensor: Service and Repair
Sensor - Dynamic Stability Control (DSC)
Service Repair No - 70.70.35
Remove
1. Remove center console finisher.
2. Release and remove air duct.
3. Remove - bolts securing DSC sensor.
4. Release DSC sensor, disconnect multiplug and remove sensor.
Refit
1. Position DSC sensor and connect multiplug.
2. Locate DSC sensor to mounting bracket, fit bolts and tighten to 8 Nm (6 ft. lbs.).
3. Fit air Duct.
4. Fit center console finisher.
5. To ensure correct operation, the ABS system MUST be tested using Test Book/T4.
