Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
7. Fit LRT-12-226 to VCC solenoid and remove solenoid.
CAUTION: Do not allow oil to come into contact with the drive belts while removing the solenoid.
Refit
1. Fit LRT-12-226 to VCC solenoid and fit solenoid.
2. Tighten VCC solenoid to 25 Nm (18 ft. lbs.) and remove LRT-12-226.
3. Clean VCC solenoid, VCC solenoid seal and mating faces.
4. Lubricate inner mating face of VCC solenoid seal.
5. Fit VCC solenoid seal, tit bolts and tighten.
6. Connect multiplug to VCC solenoid.
7. Connect coolant hose to coolant pump and secure with clip.
8. Fill cooling system.
9. Connect battery earth lead.